Next scheduled trigger times
- Trigger 17m 12s
- Trigger 214m 24s
- Trigger 321m 36s
- Trigger 428m 48s
- Trigger 536m
Ability planner · weight model sources reviewed November 4, 2026
Estimate Raccoon or Dragonfly cooldown from current weight, or enter any pet’s displayed timer. Then calculate triggers per hour, extra cooldown reductions, session attempts and success chances.
Choose Raccoon or Dragonfly and enter its current kg. This calculates the community model’s timer before extra buffs. For another pet, or a modified timer, use the displayed cooldown in the planner below.
Enter a positive weight up to 100 kg. Above 100 kg, scaling assumptions differ across calculators; use your observed timer below.
Community linear weight model, for positive weights up to 100 kg. No mutation, toy or temporary buff is applied. Check the displayed timer in game; a trigger does not guarantee a useful target. Dragonfly model source, reviewed 2026-11-04. Source review is not an in-game measurement.
Editable inputs · community presets
Enter the cooldown and chance shown by your current pet, then compare additive or multiplicative reductions. The result estimates scheduled triggers and independent successful procs; it does not infer pet-specific age scaling.
Manual example inputs are shown. Replace them with your observed timer and chance, or choose a labeled community baseline.
Effective cooldown
7m 12s
Stacked reduction before floor
28%
Scheduled triggers / pet
8
Total ability attempts
8
Attempts / hour
8.33
Expected successful procs
2
Chance of at least one success
89.99%
Expected successful procs / hour
2.08
Average successful proc interval
28m 48s
The raw stacked cooldown is 7m 12s; the entered floor does not change it.
Expected procs are long-run averages, not guarantees. The probability result assumes independent attempts with the same chance. Animation time, targeting rules, hunger, server lag, ability queues, shared cooldowns, pity systems, and pet-specific caps are excluded unless already reflected in your displayed inputs.
Calculated reference values before mutation, toy or temporary buffs. Both source models use a 60-second floor. Compare these estimates with the timer in your game.
| Pet | 1 kg | 10 kg | 50 kg | 100 kg |
|---|---|---|---|---|
| Raccoon | 900 s | 864 s | 704 s | 504 s |
| Dragonfly | 296.97 s | 269.7 s | 148.5 s | 60 s |
The weight estimator stops at 100 kg because heavier-weight scaling assumptions differ across calculators. For heavier pets, modified setups or other species, use the displayed timer in the planner.
Cooldown
Use seconds from one unchanged pet state. Convert 10 minutes to 600 seconds. A timer already modified by a toy or mutation must not receive that same reduction twice.
Frequency
Session attempts use complete cooldown intervals. Enable “ready at start” only when the ability can fire immediately at the beginning of your measurement window.
Probability
A pet can activate without its chance-based effect succeeding. The tool reports scheduled attempts, mathematical expectation, and cumulative hit probability as different values.
Stacking rule
Suppose a pet has a 600-second timer and two reductions of 20% and 10%. The two common interpretations do not produce the same cooldown.
| Rule | Calculation | Result | Meaning |
|---|---|---|---|
| Additive | 600 × (1 − 0.20 − 0.10) | 420 seconds | Percentages combine into one 30% reduction. |
| Multiplicative | 600 × 0.80 × 0.90 | 432 seconds | Each reduction applies to the remaining timer. |
The calculator does not claim one rule applies to every Grow a Garden effect. Compare a controlled in-game observation against both results, then select the matching rule.
The selected stacking rule reduces the entered base timer. A known pet-specific floor then clamps the result when the raw timer would fall below it.
Completed session seconds are divided by effective cooldown and rounded down. Independent active copies multiply that count.
Total attempts are multiplied by the success probability. This is a long-run mean, not a promise for one session.
Independent attempts use 1 − (1 − p)^n, where p is success chance per trigger and n is the total number of scheduled attempts.
Evidence boundary
Pet ability stats can depend on pet identity, age, weight, mutation, toys, hunger, active buffs, server behavior, and patch. Public calculator databases disagree on age caps, stat labels, and scaling claims. The two weight models provide an estimate before extra buffs. For a different setup, enter the cooldown and chance you observe in game, keeping the pet and modifiers unchanged.
If your next observed trigger does not match the projection, update the base timer, stacking rule, or floor before using the result for a longer session.
The sourced community linear models use max(60, 904 − 4 × kg) seconds for Raccoon and max(60, 300 − 3.03 × kg) seconds for Dragonfly. This tool applies them only to positive weights up to 100 kg, before extra buffs. These are calculator models, not verified in-game timers. Use your displayed cooldown if the setup differs.
The weight estimator supports Raccoon and Dragonfly up to 100 kg. For other pets or heavier setups, enter the timer shown in game in the cooldown and proc planner. It accepts your observed timer without guessing pet-specific scaling. No toy or mutation bonus is added automatically.
No. A one-hour session with a 60-second timer and no immediate trigger gives 60 scheduled attempts in this model. Eligible targets, targeting rules and the game state determine useful outcomes. A 100% chance setting counts triggers; it does not prove that every trigger gives the outcome you want.
Enter the cooldown displayed for the exact pet state you want to model before applying the separate reductions entered below. Keep age, weight, mutation, toys, hunger, and patch state consistent. If the displayed number already includes a buff, do not apply the same buff again.
The answer can depend on the effect and patch. Additive stacking combines the percentages before reducing the timer. Multiplicative stacking applies each reduction to the remaining timer. Use the rule supported by your current in-game comparison; the calculator exposes both instead of silently choosing a universal rule.
It is the number of successes expected over many identical sessions: total scheduled attempts multiplied by the per-trigger chance. A result of 2 does not guarantee exactly two successes in one session.
No. Pet-specific cooldown floors and ability caps are not inferred. Enter a known floor when you have current evidence, or use zero when it is unknown and treat the result as an unclamped scenario.
Plan the hatch schedule, cost and probability of obtaining the pet before modeling its ability here.
Calculate egg hatch odds →Project pet weight and model an age target from your own observations before entering a current ability timer here.
Open the pet age calculator →Sum level requirements and estimate continuous leveling time before measuring the ability at a new age.
Calculate pet XP time →Keep Mutation Machine roll probability separate from a chance-based pet ability proc.
Calculate mutation odds →